 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Models PT-10 and PT-20 Vishay Dale Transformers Pulse, Trigger Type FEATURES * Choice of printed circuit or bobbin-type configurations. * Designed to transfer high amplitude or long duration pulses without saturation. RoHS COMPLIANT * Designed for low-cost trigger source isolation in half and full wave SCR power control circuits, including motor speed controls, heater controls and incandescent lighting controls. STANDARD ELECTRICAL SPECIFICATIONS DASH NUMBER 101* 102* 103* 104 105 106* 107 108 109 110 111* 112* 113 114 115* 116* 117* 118 119 120* 121 TURNS RATIO 1:1 10 % 1:1 10 % 1:1 10 % 1:1 10 % 1:1 10 % 1:1:1 10 % 1:1:1 10 % 1:1:1 10 % 1:1:1 10 % 1:1:1 10 % 2:1 10 % 2:1 10 % 2:1 10 % 2:1 10 % 2:1:1 10 % 2:1:1 10 % 2:1:1 10 % 2:1:1 10 % 2:1:1 10 % 5:1 10 % 5:1:1 10 % FIGURE LEAKAGE PRIMARY INDUCTANCE INDUCTANCE MINIMUM (H) MAXIMUM (H) 200 500 1000 2000 5000 200 500 1000 2000* 5000 500 1000 2000 5000 200 500 1000 2000 5000 5000 5000 3 6 12 13 15 3 6 12 13 15 6 10 12 15 8 11 15 60 75 1500 1500 INTERWINDING CAPACITY MAXIMUM (pF) 800 1500 2000 2800 3500 800 1500 2000 2800 3500 1000 1300 1800 2400 700 1000 1300 2000 2100 400 400 DCR MAXIMUM (Ohms) 1.5-1.5 4.5-4.5 8-8 12-12 18-18 2-2-2 6-6-6 10-10-10 15-15-15 27-27-27 4-2 10-2 10-5 18-10 4-2-2 6-2-2 5-2-2 10-5-5 20-10-10 19-3 20-4-4 UNIPOLAR ET (V-SEC) 570 912 1283 1853 2850 570 912 1283 1853 2850 912 1288 1881 2850 570 912 1311 1881 2850 2850 2850 1/3 1/3 1/3 1/3 1/3 2/4 2/4 2/4 2/4 2/4 1/3 1/3 1/3 1/3 2/4 2/4 2/4 2/4 2/4 1/3 2/4 *Standard items in PT-10 Model. Other Dash Numbers available on request. All Dash Numbers standard in PT-20 Model. ELECTRICAL SPECIFICATIONS Primary Inductance Values: From 200 H to 5000 H Turns Ratio: 1:1, 1:1:1, 2:1, 2:1:1 and 5:1 Temperature Range: - 10 C to + 70 C Dielectric Test at 60 Hz: 1600 V RMS (Windings to case) AC Line Voltage at 60 Hz: 240 V RMS maximum in test circuits shown MATERIAL SPECIFICATIONS Bobbin: Nylon Leads: Tinned, solderable PT-10 = Polyurethane insulated magnet wire for clip or bracket mounting PT-20 = Tinned copper 0.025 [0.635]Sq. for printed circuit mounting Header: Thermoset plastic Covering: Thermoplastic www.vishay.com 1 For technical questions, contact: Magnetics@vishay.com Document Number: 34073 Revision: 29-Nov-07 Models PT-10 and PT-20 Vishay Dale CIRCUIT DIAGRAMS Load Load Line Line Transformer Coupled Unijunction Transistor Triggering Circuit Transformer Coupled Breakdown Diode Triggering Circuit DIMENSIONS in inches (millimeters) PT-10 0.593 0.062 [15.06 1.57] Dia. RED GRN. 0.010 [0.254] Dia., 4 Leads 0.828 0.062 [21.03 1.57] RED GRN. PT-10 0.593 0.062 [15.06 1.57] Dia. NAT. GRN. RED 0.010 [0.254] Dia., 6 Leads 0.828 0.062 [21.03 1.57] NAT. GRN. RED 1 3 2 4 1.50 [38.10] Min. Typ. 5 3 1 6 4 2 1.50 [38.10] Min. Typ. RED 1 GRN. 3 NAT. 5 RED 1 GRN. 3 PRI. SEC. PRI. SEC. TER. Figure 1 2 RED 4 GRN. Figure 2 0.800 [20.32] Max. 0.250 [6.35] Min. 2 RED 4 GRN. 6 NAT. PT-20 0.968 [24.59] Max. 0.775 [19.68] Max. PT-20 0.968 [24.59] Max. 0.775 [19.68] Max. 0.250 [6.35] Min. 0.800 [20.32] Max. 2 0.600 [15.24] 1 4 0.600 [15.24] 3 0.300 [7.62] Ref. 0.250 [6.35] Ref. 1 3 2 5 1 4 6 3 0.300 [7.62] Ref. 0.250 [6.35] Ref. 0.500 [12.70] 0.025 [0.635]Sq. 4 Leads 0.500 [12.70] 0.025 [0.635]Sq 6 Leads 5 1 3 PRI. SEC. PRI. SEC. TER. Figure 3 2 4 Figure 4 2 4 6 PART MARKING - Vishay Dale - Model - Style - Dash number Document Number: 34073 Revision: 29-Nov-07 For technical questions, contact: Magnetics@vishay.com www.vishay.com 2 Models PT-10 and PT-20 Vishay Dale ORDERING INFORMATION PT MODEL 10 STYLE 101 DASH NUMBER EB PACKAGE CODE e2 JEDEC LEAD (Pb)-FREE STANDARD GLOBAL PART NUMBER P T MODEL 0 1 STYLE 0 E B 1 0 1 PACKAGE CODE DASH NUMBER www.vishay.com 3 For technical questions, contact: Magnetics@vishay.com Document Number: 34073 Revision: 29-Nov-07 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of PT10101EBE2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |